Madhuram Motors

CGDI CG70 airbag reset tool adopts the new technology of intelligent diagnosis, and clears the fault code with only one key. No need to open the cover, no welding wire, no need to disassemble the chip, just connect the pin port, this product can diagnose the airbag module information, clear the fault code, and make the vehicle perfectly revived.
CGDI CG70 Airbag Reset Tool Highlights: 
1. Free Update Online for 1 Year.
2. No dismantling, no welding, non-destructive repair.Simulate the principle of car communication, connect the pin port, you can read/clear the fault code of the airbag module with one key. Abandon the traditional wire welding/chip removal mode, and use pin diagnosis to avoid operational risks caused by electric soldering irons/soldering heat guns.
3. Intelligent diagnosis, clear fault codesSupport multiple diagnostic protocols, CAN protocol, K/L protocol, SWCAN protocol and J1850 protocol, compatible with different car models and airbag modules.
4. Specific function, fast retrieval.Specialized in airbag module repair. The entire software is designed according to the model number. It is simple and clear, with clear directories, and the built-in search function can help us quickly find the operation interface. 5. The wiring is clear and the pins are clearly defined.The software has a built-in clear wiring diagram, and the position of the "button" is obvious, which is integrated with the interface and does not hinder the operation process. All wiring diagrams are taken in kind, with clear pins, and the communication line number is marked to avoid user wiring mistakes. 6. Independent research and development, real-time update.

Description

SP20 series (SP20B/SP20F/ SP20X/SP20P) programmers are the latest high speed mass production programmers for SPI FLASH launched by Shenzhen SFLY Technology. It fully supports the high-speed programming of SPI NOR / NAND FLASH, I2C / MicroWire and other EEPROMs from domestic and foreign manufacturers.

Hardware features

??? USB TYPE-C communication interface, no need for external power supply when used in USB mode;
??? Support USB and standalone mode high-speed mass production programming;
??? Replaceable 28-pin ZIF socket, which can be supported by conventional universal programming bases;
??? RGB three-color LED indicates the working status, and the buzzer can prompt the success and failure of the programming;
??? Support poor pin contact detection, effectively improve programming reliability;
??? Support ISP mode programming, which can support on-board programming of some chips;
??? intelligent detection chip placement and removal, automatic startup programming;
??? Short circuit / over current protection function can effectively protect the programmer or chip from accidental damage;
??? Programmable voltage design, adjustable range from 1.7V to 5.0V, can support 1.8V/2.5V/3V/3.3V/5V chips;
??? Provide equipment self-check function;
??? Small size (size: 108x76x21 mm), simultaneous programming of multiple machines only takes up a very small work surface;

Software features

??? Support Win7/Win8/Win10/Win11;
??? Support software upgrade to add new devices;
??? Support project file management (project file saves all programming parameters, including: chip model, data file, programming settings, etc.);
??? Supports project file lock and read-only attributes to prevent operators from setting programming parameters by mistake;
??? Support multi-computer connection: one computer can be connected with 8 SP20 series programmers for simultaneous programming;
??? Support the reading and writing of additional storage area (OTP area) and configuration area (status register, etc.) of the chip;
??? Support some SFDP content reading of SPI FLASH;
??? Automatic serial number function (can be used to generate product unique serial number, MAC address, Bluetooth ID, etc., support automatic increment and file mode).

Packing list

SP20B High-speed Programmer
C-Type Data Cable
ISP Cable
Instruction Manual

CGDI CG70 airbag reset tool adopts the new technology of intelligent diagnosis, and clears the fault code with only one key. No need to open the cover, no welding wire, no need to disassemble the chip, just connect the pin port, this product can diagnose the airbag module information, clear the fault code, and make the vehicle perfectly revived.
CGDI CG70 Airbag Reset Tool Highlights: 
1. Free Update Online for 1 Year.
2. No dismantling, no welding, non-destructive repair.Simulate the principle of car communication, connect the pin port, you can read/clear the fault code of the airbag module with one key. Abandon the traditional wire welding/chip removal mode, and use pin diagnosis to avoid operational risks caused by electric soldering irons/soldering heat guns.
3. Intelligent diagnosis, clear fault codesSupport multiple diagnostic protocols, CAN protocol, K/L protocol, SWCAN protocol and J1850 protocol, compatible with different car models and airbag modules.
4. Specific function, fast retrieval.Specialized in airbag module repair. The entire software is designed according to the model number. It is simple and clear, with clear directories, and the built-in search function can help us quickly find the operation interface. 5. The wiring is clear and the pins are clearly defined.The software has a built-in clear wiring diagram, and the position of the "button" is obvious, which is integrated with the interface and does not hinder the operation process. All wiring diagrams are taken in kind, with clear pins, and the communication line number is marked to avoid user wiring mistakes. 6. Independent research and development, real-time update.

• USB (Full speed 12 Mbits/s interface to host PC)
• Real-time execution
• MPLAB IDE compatible (free copy included)
• Built-in over-voltage/short circuit monitor
• Firmware upgradeable from PC/web download
• Totally enclosed
• Supports low voltage to 2.0 volts (2.0v to 6.0v range)
• Diagnostic LEDs (power, busy, error)
• Read/write program and data memory of microcontroller
• Erase of program memory space with verification
• Freeze-peripherals at breakpoint
• Program up to 512K byte flash with the Programmer-to-Go*
• Header Information 

*Please consult the PICkit 3 readme to determine Programmer To Go device support limitations.

Some 8-, 14- and 18-pin devices use small header boards with a special MCU for debugging. This special MCU has extra pins for PICkit 3 communication and therefore allows the use of all pins on the part for the application. The header board is not used or needed for programming. However, when debugging these devices the header must be used. See the "Header Specification" document below.

he PICkit 3 is not recommended for new designs and no new device support will be added to it as of June 1, 2019. For new designs, please see the MPLAB PICKit 4.

Microchip's PICkit™ 3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer. In-circuit debugging offers these benefits:

• Low cost
• Minimum of additional hardware needed for debug
• Expensive sockets or adapters are not required

PCM Flash Any License 

Dongle + License

4500+ Any License Price

 

Please Specify The Type Of Dongle (Small Or Large) In The Comment To The Order. We Will Send The One That Is In Stock By Default. Pcmflash Is An Integrated Software Solution Intended For Reprogramming Ecus And Tcus Of Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus And Other Vehicles. There Are Universal Modules Denso Sh705X Bootloader And Bsl Tricore. It Supports Work Via Ads Adapter (Version 1, Not For All Ecus) As Well As Via Any J2534-compatible Adapter If There Are Appropriate Drivers And Libraries. The Tool Has Been Tested With Openport 2.0, Mongoose Jlr, Mongoosepro Jlr, Teradyne Gna600 (Vcm 1), Mazda Vcm 2.

The Software Is Marketed On A Module Basis And Has Simple And Clear Interface. The Guardant Dongle Is Used For The Protection From Unauthorized Access. It Supports Flashing Both Backup (Vbf) And Binary (Bin) Files. When Flashing Binary Files Checksum Verification And Correction Is Available For Most Of The Modules. Conversion From Vbf/Gds Into Bin Is Supported If The Ecu Doesn’t Support Reading. Most Modules Support Checksum Verification And Correction As Well As Vid Transfer (If Needed) While Flashing Binary Files.

 

The Usb Dongle Needs To Be Linked To A Pc. The Authorization Process Is Automatic And Requires Internet Connection At The First Attempt To Work With An Ecu. The Dongle Can Be Used On Several Computers.